Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Stage 1 for the BF XR6 Turbo and Typhoon involves the SCT X3 Ford Flash device. The X3 allows Autotech to reprogram the factory ECU (computer), enabling higher power levels, combined with better driveability and fuel economy. The X3 can also store up to 3 different tunes for different applications or fuel types.
Stage 1 also includes high flow 60lb injectors that are used to overcome the limited factory injectors on the BF Xr6 Turbo.

The Stage 2 Kit for the BA Xr6 Turbo includes the following components:

SCT Xcal 3Ford Flash Tuner
60lb High Flow Injectors
Cold Air Intake
2.5 inch Stainless Exhaust system

The Stage 3 Kit for the BF XR6 Turbo includes the all components from the Stage 2 kit and the following additional components:

High Flow Intercooler
Turbocharger Wastegate porting + Upgraded Actuator
Battery relocation kit
Replacement High flow Fuel pump
Extreme flow Cold Air Intake

While the BF XR6T and Typhoon came with a set of stronger rods, when chasing power levels in excess of 420kw Autotech recommend rebuilding your engine. Autotech have extensive engine rebuilding services that can meet your requirements if you are after more power. You may also consider modifying your turbocharger to an 800HP unit or installing a new turbocharger with external Wastegate. Send us an e-mail or call our offices for more information.

Copyright 2011, Autotech Engineering Pty Ltd
18-20 George St, Granville NSW 2142
Ph: 02 9897 1378 Fax: 02 9897 3473